- 相關推薦
微軟系統工程師考試試題
微軟認證計劃進行了全面升級，以涵蓋云技術相關的解決方案，并將此類技能的考評引入行業已獲得高度認可和備受矚目的認證考試體系。以下是小編整理的關于MCSE微軟系統工程師考試試題，希望大家認真閱讀!
1. you suspect numerous broadcasts are transmitted at a segment. what program should you use to find out which station is causing this traffic?
a. performance monitor
b. network monitor (*)
c. server manager
d. response probe
2. you want to create a capacity-planning baseline of internal resource for your nt server. which tool you use?
a. performance monitor
b. response probe (*)
c. network monitor
d. excel
3. how do you set up a filter in network monitor in order to show traffic generated from automatic ip adress assignement?
a. include * any<-->bootp
b. protocol==dns
c. protocol==wins
d. protocol==dhcp (*)
4. you have 4 servers and 500 users. your users need to access the resources at all servers. you need to have centralized account management and administration.what is the most appropriate domain model?
a. single domain model (*)
b. master domain model
c. multiple master domain
d. complete trust model
5. your server has multiple processors installed. which object should be measured if you want only a single line in the graph of performance monitor to represent all processes?
a. processor time of the thread object
b. processor time of the process object
c. processor time of the processor object
d. total processor time of the system object (*)
6.during printing checks your printer jammed. checks can not be reprinted as it would violate check. the printer is turned off and the jam cleared. how can you print your check again?
a. resume from printer menu
b. resume from document menu
c. restart from document menu (*)
d. pause printer and restart again
7.since you added 7 bdcs to your network, network traffic due to
domain synchronization has increased.? this is slowingdown your
network. what should you do to remedy this problem?
a. add more bdcs
b. increase the value of the pulse concurrency settings
c. increase the value of the pulse setting (*)
d. change the replicator governor parameter
8.you have a p133, 32mb, 2gb scsi disk configured as file & print
server . your server has slow response time. network monitor shows
the following figures:
object:processor %processor time 88,1%
object:memory pages/sec 101, commited bytes 84293
object:physical disk %disk time 100 %
what should be done:
a. upgrade to a second processor
b. upgrade to a faster processor
c. upgrade memory to 64mb (*)
d. implement raid5
9.what is the cause of the server stop in the event viewer? (exhibit
showing a picture of the event viewer with lots of red marked events.
a. ne200 failed (*)
b. server service stopt
c. cdrom failed
d. netlogon failed
10.you have the job to make new custom fault tolerance standard for
your company. the company now uses disk duplexing as the current
standard.
required results :
data integrity must be maintained when 1 disks fails.
optional results :
the fault tolerance methode must not use additional processor time.
the read access time must be improved.
proposed solution :
introduce a stripeset with parity. what does the proposed solution
produce?
a. the required result and the optional results.
b. the required result and one of the optional results. (*)
c. the required result only.
d. does not produce the required result.
【微軟系統工程師考試試題】相關文章：
微軟系統工程師認證考試大綱09-30
微軟認證:微軟系統工程師認證介紹08-26
2017年微軟認證工程師認證考試試題09-04
微軟認證考試企業技術模擬試題11-05
2017年微軟認證考試模擬試題08-14
微軟認證考試試題及答案「經典版」08-21
微軟認證考試企業技術篇試題07-17
微軟認證工程師考試大綱07-06
MCSE微軟認證系統工程師認證10-02
2016年微軟認證考試試題及答案09-23